R&S offers a wide variety of commercial motor operators to automate any of your commercial grade doors. We offer new construction installations as well as retrofits and replacements. R&S has a motorized solution for you! Email us today for a free estimate on commercial motor operators.

  • All models U.L. listed
  • 115/230 volt – 1 phase or 208/230/460 volt – 3 phase
  • Full overload protection
  • Heavy duty reversing controller
  • Instant reverse motor wiring on single phase
  • 3-button NEMA 1 control station
  • 24 volt control circuit
  • Heavy duty driven limits
  • Right or left hand / brackets or wall mount
  • MG operators available with solid state controller
  • Wired standard with constant pressure to close
 
 
Liftmaster-H.png

Model ‘H’ Belt Drive Hoist Operator:

  • Model H is an industrial-duty hoist operator for use on sectional doors with high lift or vertical lift and rolling service doors and grilles. It features a continuous-duty high-starting torque motor, a universal-mount frame design, industrial ball bearings on the output shaft and an emergency chain hoist with an electric interlock.

  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone, tablet or computer for greater peace of mind. Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App
  • Single-Phase: 115V and 230V, 3-Phase: 208V, 230V and 460V
  • Control Function Selector Dial enables easy selection and programming of (7) wiring types, from constant pressure to close, to specialized Timer-to-Close functionality
  • Continuous-Duty High-Starting Torque Motor
  • Available in 1/3, 1/2, 3/4 and 1 HP
  • First-stage heavy-duty 5L V-belt; second-third-fourth stages #48 chain; #50 output sprocket chain
  • Industrial ball bearings on 1″ output shaft, heavy-duty oil-filled bushings on reduction shafts
  • Brake standard on 3/4 and 1 HP operators. (optional on 1/2 HP; not available on 1/3 HP)
  • Two-year warranty
  • Click here for brochure


Model GH Heavy Industrial-Duty Gear-Reduced Hoist Operator:

  • Model GH is a heavy industrial-duty gear-reduced hoist operator and is ideal for all heavier rolling doors and grilles in standard usage or high cycle applications.

  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone, tablet or computer for greater peace of mind. Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App
  • Single-Phase: 115V and 230V, 3-Phase: 208V, 230V and 460V
  • Heavy-Duty Worm Gear-In-Oil Gear Reducer delivers performance for heavy industrial, high cycle applications
  • Control Function Selector Dial enables easy selection and programming of (7) wiring types, from constant pressure to close, to specialized Timer-to-Close functionality
  • Continuous-Duty High-Starting Torque Motor
  • Available in 1/2, 3/4, 1, 1-1/2, 2 and 3 HP
  • 45:1 first-stage using heavy-duty gears running in oil bath; cast iron housing. Special “all-climate” synthetic gear oil for greater low-temperature performance; #50 output sprocket chain
  • Sealed roller bearings in gear reducer
  • Brake standard on GH operators
  • Two-year warranty
  • Click here for brochure

model-mg.jpg

Liftmaster-Model-J.png

Model ‘J’ Belt Drive Jackshaft Operator:

  • Model J is for use on small to medium sized rolling doors and grilles with standard usage. Doors used with this operator should have the ability to be lifted by hand in case of emergency or power outage.

  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone, tablet or computer for greater peace of mind. Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App
  • Single-Phase: 115V and 230V, 3-Phase: 208V, 230V and 460V
  • Control Function Selector Dial enables easy selection and programming of (7) wiring types, from constant pressure to close, to specialized Timer-to-Close
  • Continuous-Duty High-Starting Torque Motor
  • Adjustable Friction Clutch
  • Available in 1/3, 1/2, 3/4 and 1 HP
  • First-stage heavy-duty 5L V-belt; second-third-fourth stages #48 chain; #50 output sprocket chain
  • Industrial ball bearings on 1″ output shaft; heavy-duty oil-filled bushings on reduction shafts
  • Brake standard on 3/4 and 1 HP operators (optional on1/2 HP, not available on 1/3 HP)
  • Two-year warranty
  • Click here for brochure

MODEL T Trolley Operator:

Model T is used for standard lift sectional doors in a commercial application.

  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone, tablet or computer for greater peace of mind. Requires 828LM MyQ Internet Gateway to connect to MyQ Smartphone App
  • Single-Phase: 115V and 230V, 3-Phase: 208V, 230V and 460V
  • Control Function Selector Dial enables easy selection and programming of (7) wiring types, from constant pressure to close, to specialized Timer-to-Close
  • Continuous-Duty High-Starting Torque Motor
  • Adjustable Friction Clutch
  • Available in 1/3, 1/2, 3/4 and 1 HP
  • First-stage heavy-duty 5L V-belt; second #41 chain; #48 (for 1/3 and 1/2HP) and #41 (for 3/4 and 1HP) output chain on trolley
  • Industrial ball bearings on output shaft, heavy-duty oil-filled bushings on reduction shafts
  • Brake Standard on 3/4 and 1 HP operators, (optional on 1/2 HP, not available on 1/3 HP
  • #48 drive chain on 1/3 and 1/2 HP. #41 on 3/4 and 1HP
  • Two-year warranty

Click here for brochure

More models are available. Contact R&S for more info.

MODEL-T-Trolley-Operator.png