Operators - sometimes called openers - are the motorized devices that automate your business’s rolling doors. Different operators are best suited to certain applications.

Check below to find which works best for yours.

COMMERCIAL DOOR OPERATORS


  • LiftMaster Model GH Gearhead Hoist Operator

    LiftMaster Model GH Gearhead Hoist Operator

    • For use on heavy industrial, high-cycle doors. Lubricated gear system and numerous custom modifications.

    • Rated duty cycle: 25 per hour; Greater than 90 cycles per day.

    • Larger/heavier sectional overhead doors. Side mounts to the wall for vertical or high-lift doors.

    • Larger/heavier rolling door and grilles.

  • LiftMaster Model MT  Medium-Duty Trolley Operator

    LiftMaster MT

    Medium-Duty Trolley Operator

    • For use on standard-lift sectional overhead doors with mid-range duty-cycle requirements.

    • Rated duty cycle: Maximum 12 cycles per hour; Less than 50 cycles per day.

    • Suspends from ceiling directly attaches and controls a sectional door.

    • Trolley with disconnect disengages operator for manual lifting in an emergency.

  • LiftMaster Model MH Medium-Duty Hoist Operator

    LiftMaster MH

    Medium-Duty Hoist Operator

    • For use on smaller, lighter commercial doors with mid-range duty cycle requirements.

    • Rated duty cycle: Maximum 12 cycles per hour; Less than 50 cycles per day.

    • Wall mount for high or vertical lift sectional doors or small rolling doors and grilles.

    • Chain hoist with electric interlock for manual operation in an emergency.

  • LiftMaster MGJ Medium-Duty Gear-Reduced Jackshaft Operator

    LiftMaster MGJ

    Medium-Duty Gear-Reduced Jackshaft Operator

    • For use on mid-range duty-cycle applications when specifications require a gearhead reducer.

    • Rated duty cycle: Maximum 12 cycles per hour; Less than 50 cycles per day.

    • Wall mount for high or vertical lift sectional doors or small rolling doors and grilles.

    • Floor level disconnect disengages operator for manual lifting in an emergency.

  • LiftMaster JHDC MAXUM DC Hoist Commercial Door Operator

    LiftMaster JHDC

    MAXUM DC Hoist Commercial Door Operator

    • Motor and Gearbox purpose built to meet the high demands of commercial applications.

    • 3-button control with 4-line LCD display for setup and programming from the floor level.

    • Up to 33% faster than standard commercial door operators, allowing you to get shipments in and out quickly. Average speed is 12” per second.

    • Optional Battery Backup accessory

    • Diagnostics at floor level through myQ® Facility

    • Built-in Wi-Fi®

    • Security+ 2.0® virtually eliminates radio wave interference and offers extended range.

  • LiftMaster LJ8900W Light-Duty Commercial Door Operator for Sectional Doors

    LiftMaster LJ8900W

    Light-Duty Commercial Door Operator for Sectional Doors

    • Wallmount with smaller, lighter sectional doors with light-duty cycle requirements.

    • Rated Duty Cycle: Maximum 10 cycles per hour; Fewer than 25 cycles per day.

    • Wall mount on small sectional doors.

    • Easily connect the operator to the facility's network with built-in Wi-Fi®.

  • LiftMaster MHS Medium-Duty Slow-Speed Hoist Operator

    LiftMaster MHS

    Medium-Duty Slow-Speed Hoist Operator

    • For use on rolling sheet doors which require slower speeds.

    • Rated duty cycle: Maximum 12 cycles per hour; less than 50 cycles per day.

    • Slow speed operation with electric interlock and chain hoist for manual operation in an emergency.

    • Wall mount for small rolling sheet doors.